The first pillars for “Kühtai Solar” have already been drilled and installed.
Not a traditional groundbreaking ceremony, but a visible symbol of an Alpine energy future: The installation of the first piles marks the start of the visible construction of the "Kühtai Solar" ground-mounted photovoltaic system in the Schwarzmoos area above the Kaisersee reservoir. At an altitude of approximately 2,350 meters, an Alpine photovoltaic system with a capacity of around 2,000 kWp is being built. This is equivalent to the output of PV systems on approximately 850 single-family homes. The project is scheduled for completion by the end of November.
The plant will be built in the existing Kühtai ski area, thus making multiple uses of existing alpine infrastructure. A total of 3,280 PV modules are planned, mounted on 820 frames. These will be anchored in the ground via columns. The foundations will not be conventional concrete footings, but rather a drilling method with comparatively minimal disturbance to the ground. The boreholes have a diameter of 16 centimeters and a depth of up to 2.5 meters.
Patented substructure ensures more winter power.
The project relies on a special alpine construction method: The PV modules are mounted vertically or following the terrain on a patented HTB substructure. This construction method is designed for the specific requirements of high alpine locations and is intended to offer advantages in terms of wind and snow loads, winter production, and land use. The modules have ground clearance, allowing the structure to accommodate small animals.
With Kühtai Solar, the Kühtai mountain railways demonstrate how alpine photovoltaics can be implemented in a technically, ecologically, and economically sound manner. Crucially, a construction site at this altitude cannot be approached with standard solutions. "Our partner HTB, with its patented substructure, has created a reference example for alpine PV systems, which has been classified as a flagship project," emphasizes HTB Managing Director Dr. Andreas Nischler.
Sound planning as the basis for implementation
Besides the technical implementation, early project development played a crucial role in the success of "Kühtai Solar". From an early stage, the project was supported by TINEXT, a subsidiary of TIWAG with extensive expertise in photovoltaics.
Based on thorough preliminary studies and a subsequent planning concept, the Kühtai mountain railways were able to receive targeted support in the structured development of the project. The focus was particularly on the optimal integration of the facility into the existing infrastructure and on taking into account the specific requirements of the high-alpine environment.
“As TINEXT, it was particularly important to us to support this innovative project from the very beginning and to contribute our expertise. Especially with alpine PV systems, sound preliminary work and well-thought-out planning are crucial for sustainable operation,” said Managing Director Ing. Dr. Andreas Burger.
Energy production on site, where it is needed
A key argument for the location is the exceptionally high solar irradiance of more than 1,500 kWh/m² per year, placing it in the highest designated site category. An annual yield of approximately 2.9 GWh is expected. This yield could supply around 850 households with electricity year-round.
Of particular importance is energy production during the winter months. Unlike conventional PV systems, "Kühtai Solar" is expected to deliver a significantly higher proportion of its annual production in winter due to its alpine location and unique design. This ensures that renewable energy is generated precisely when demand in the ski resort is highest.
“For us, Kühtai Solar is a logical step towards a sustainable ski resort. In the future, we will generate renewable electricity where we can also use it. This strengthens our self-sufficiency, makes sensible use of existing infrastructure and shows that alpine tourism regions can actively take responsibility for their energy future,” explain cable car managing director Philip Haslwanter and authorized signatory Willi Mareiler.
Sustainability also in construction
The construction site operations are also being designed to be as resource-efficient as possible. For example, the use of a battery-electric excavator is planned. A wooden container and optimized site logistics complete the project. The goal is to make not only the finished project, but also its implementation, as sustainable as possible.
The expansion of renewable energy in Kühtai is designed to minimize the impact on nature. Existing road and utility infrastructure is being utilized. With the installation of the first pillars, the visible implementation of a project that combines technological innovation, regional energy production, and the sustainable development of alpine tourism is now beginning. "Kühtai Solar" aims not only to supply electricity but also to demonstrate how existing tourist infrastructure can become part of the energy transition.